8.2.2 Checking information of the member switches in the stack
You can use the operation command show switch to check the member switches that make up the stack. The number is displayed in No. The change process after the switch state and switch state transition is displayed in "Switch status".
> show switch Date 20XX/10/26 11:38:56 UTC Stack status : Enable Switch No : 1 System MAC Address : 0012.e220.5101 No Switch status Model Machine ID Priority Ver 1 Master 3660-48xt4qw 0012.e220.5101 31 1 2 Backup (Initializing) 3660-48xt4qw 0012.e220.5102 11 1 > |
You can use the operation command show switch to specify detail parameter to view more information about the member switches. The stacking ports are shown in Port and Neighbor(Port.
> show switch detail Date 20XX/10/26 11:38:56 UTC Stack status : Enable Switch No : 1 System MAC Address : 0012.e220.5101 No Switch status Model Machine ID Priority Ver 1 Master 3660-48xt4qw 0012.e220.5101 31 1 2 Backup (Initializing) 3660-48xt4qw 0012.e220.5102 11 1 Port Status Neighbor(Port Model Machine ID) 1/0/49 Up(Forwarding) 2/0/49 3660-48xt4qw 0012.e220.5102 1/0/50 Up(Forwarding) 2/0/50 3660-48xt4qw 0012.e220.5102 2/0/49 Up(Forwarding) 1/0/49 3660-48xt4qw 0012.e220.5101 2/0/50 Up(Forwarding) 1/0/50 3660-48xt4qw 0012.e220.5101 > |
The switch status and switch number can also be checked on the front panel of the equipment. For details, see section 8.2.3, "Displaying the Switch Status and Switch Number on the Front Panel."