3.5.3 Number of policy-based mirroring entries on the receiving side
The following table describes the maximum number of receive-side policy-based mirroring entries that can be set per switch for each receive-side flow detection mode.
Receiving-side flow detection mode |
Receiver policy-based mirroring maximum number of entries #1 |
||
---|---|---|---|
MAC conditions |
IPv4 conditions |
IPv6 conditions |
|
layer3-1 |
- |
- |
- |
layer3-2 |
- |
- |
- |
layer3-6 |
- |
- |
- |
layer3-dhcp-1 |
- |
- |
- |
layer3-mirror-1 |
512NGn |
512NGn |
- |
layer3-mirror-2 |
- |
512NGn |
- |
layer3-mirror-3 |
512NGn |
512NGn |
- |
layer3-mirror-4 |
- |
- |
512NGn |
layer3-mirror-5 |
512NGn |
512NGn |
512NGn |
layer3-suppress-1 |
- |
- |
- |
layer3-suppress-2 |
- |
- |
- |
layer3-suppress-dhcp-1 |
- |
- |
- |
layer3-suppress-mirror-1 |
512NGn |
512NGn |
- |
layer3-suppress-mirror-2 |
- |
512NGn |
512NGn |
custom |
0~6144NGn #2 |
0~6144NGn #2 |
0~3072NGn #2 |
Legend:-Not applicable n: Number of member switches
- Note #1
-
In a stack configuration, the capacity limits increase according to the number of member switches. However, the capacity limits of the VLAN interface remains the same.
In standalone mode, n is 1.
- Note #2
-
The maximum number of entries for receiving-side policy-based mirroring is the maximum number of entries when the same flow-detection condition (MAC condition, IPv4 condition, and IPv6 condition) is specified for all the entry blocks from 0 entries when the function is not specified for the entry block.