2.5 Software
The Switch supports software licensing, mainly for L3 write and L3 advanced features. You can also add optional licenses to your software licenses to use stacking features and high-speed lines.
The following table shows the details of L3 write function and L3 advanced function, and the software licenses supported by the Switch.
Function name |
Description |
---|---|
L3 write function |
Supports basic L3 switching functions such as VLAN, Spanning Tree, RIP, Multicast, and SNMP,LLDP,Ring Protocol |
L3 Advanced Features |
Supports OSPF,BGP,VRF, policy-based routing, VXLAN,, and fast Ring switching (less than 50 ms) in addition to L3 write functionality |
Software license abbreviation |
Description |
---|---|
SL-L3A-001 |
L3 Advanced, Stacking, and Uplink 10G |
SL-L3A-002 |
L3 advanced and stacking functions |
SL-L3A-003 |
L3 advanced features, uplink 10G |
SL-L3A-004 |
L3 Advanced Features |
SL-L3L-001 |
L3 write function, stacking function, uplink 10G |
SL-L3L-002 |
L3 write function, stacking function |
SL-L3L-003 |
L3 write function, uplink 10G |
SL-L3L-004 |
L3 write function |
The following table describes the optional licenses supported by the Switch.
Optional license abbreviation |
Description |
---|---|
OP-ADV |
L3 Advanced Features L3 advanced function can be used by setting this license to the device on which L3 light function is running. |
OP-STK |
Stack functionality |
OP-ULTG |
Uplink 10G If this license is set for the following switches, SFP+/SFP shared port can be used as 10Gbit/s(SFP +:
|
OP-SYNC |
Sync-E You can use Sync-E by configuring the licensing on the following devices:
|
OP-PORT |
Number of ports expansion When this license is set for the following devices, the available ports are expanded.
|