2.6 STACK
This section describes the operation messages for the event location STACK.
Message ID |
Event Level |
Message text |
---|---|---|
Content and response |
||
34000001 |
E3 |
Switch <switch no.> changed to <role> switch and initializing. |
The member switch changed its status to <role> and started initialization. <switch no.>: Switch number <role>: Switch status
[Action] None. |
||
34000002 |
E3 |
Switch <switch no.> changed to <role> switch and started switchover. |
The member switch changed its status to <role> and started switchover. <switch no.>: Switch number <role>: Switch status
[Action] None. |
||
34000003 |
E3 |
Master switch detected switch <switch no.> and adding to stack. |
The master switch added the member switch <switch no.> to STACK. <switch no.>: Switch number [Action] None. |
||
34000004 |
E3 |
Switch <switch no.> was deleted from stack. |
The member switch was deleted from the stack configuration. <switch no.>: Switch number [Action] Check the status of the member switch and the status of the stack port used to connect the member switch. |
||
34000005 |
E3 |
Stack port(<switch no.>/<nif no.>/<port no.>) connected with switch <switch no.> of Machine ID <mac address>. |
The stack port was connected with a member switch that has the chassis MAC address <mac address>. <switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number <switch no.>: Switch number <mac address>: Chassis MAC address [Action] None. |
||
34000006 |
E3 |
Stack port(<switch no.>/<nif no.>/<port no.>) disconnected with switch <switch no.> of Machine ID <mac address>. |
The stack port was disconnected from a member switch that has the chassis MAC address <mac address>. <switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number <switch no.>: Switch number <mac address>: Chassis MAC address [Action] Check the status of both the stack port and the disconnected member switch. |
||
34000007 |
E3 |
Switch <switch no.> connected to stack port(<switch no.>/<nif no.>/<port no.>) cannot join in stack for <reason>. |
A member switch connected to the stack port cannot participate in the stack configuration. <switch no.>/<nif no.>/<port no.>: Switch number/NIF number/port number <switch no.>: Switch number <reason>: Reason why the member switch cannot participate in the stack configuration
[Action]
|
||
34000008 |
E3 |
Master switch ordered switch <switch no.> to restart because master switch detected stack error. |
The master switch instructed this member switch to restart because the master switch detected an error. <switch no.>: Switch number [Action] If this message is repeatedly output, replace the member switch that has the displayed switch number. |
||
34000009 |
E3 |
Switch <switch no.> restarted because this switch was disconnected from other switch in stack building. |
The member switch was restarted because it was isolated from the other member switches during the stack building process. <switch no.>: Switch number [Action] Check the status of all stack ports between the member switch and the other member switches. |
||
3400000a |
E3 |
Switch <switch no.> restarted because this switch synchronized configuration of master switch. |
The member switch was restarted because it synchronized with the configuration of the master switch. <switch no.>: Switch number [Action] None. |
||
3400000b |
E9 |
Switch <switch no.> restarted because hardware has stopped. |
The member switch was restarted because the hardware stopped. <switch no.>: Switch number [Action] Check the log by executing the show logging command.If a problem is indicated in the log, take appropriate action according to the error message. |
||
3400000c |
E3 |
Switch <switch no.> restarted because this switch detected other master switch. |
The member switch <switch no.> was restarted because another master switch was detected. <switch no.>: Switch number [Action] None. |
||
3400000d |
E9 |
Switch <switch no.> restarted due to restart order from master switch. |
The member switch was restarted as instructed by the master switch. <switch no.>: Switch number [Action] If this message is repeatedly output, replace the member switch. |
||
3400000e |
E9 |
Switch <switch no.> restarted due to stack error. |
The member switch was restarted because an error occurred in the stack. <switch no.>: Switch number [Action] If this message is repeatedly output, replace the member switch. |
||
3400000f |
E9 |
Switch <switch no.> restarted because this switch failed synchronization of configuration of master switch. |
The member switch was restarted because it failed to synchronize with the configuration of the master switch. <switch no.>: Switch number [Action]
|
||
34000011 |
E3 |
Switch <switch no.> initialized as <role> switch. |
The initialization of the member switch was completed with its switch status as <role>. <switch no.>: Switch number <role>: Switch status
[Action] None. |
||
34000012 |
E3 |
Master switch detected switch <switch no.> initialized. |
The master switch recognized that the initialization of the member switch <switch no.> was completed. <switch no.>: Switch number [Action] None. |
||
34000013 |
E3 |
Switch <switch no.> finished switchover as <role> switch. |
The switchover of the member switch was completed with its switch status as <role>. <switch no.>: Switch number <role>: Switch status
[Action] None. |