1.1.5 Output to remote server
The Switch can use syslog output function or E-Mail send function to output not only operational messages, but also messages classified by message type to remote servers. For more information, refer to the "Configuration Guide Vol.1" "19 Logging".
-
Syslog Out Function
Syslog function can be used to output various messages to remote servers. However, syslog function may lose data due to frame loss, etc.
-
E-mail transmission
You can send various messages as mail by using E-Mail send function. This functionality cannot receive emails. If you reply to the e-mail sent by this function, a sending error occurs.