2.3.1 Command list
The following tables list the common configuration commands for QoS control.
Command name |
Description |
---|---|
ip qos-flow-group |
Applies an IPv4 QoS flow list to an Ethernet interface or VLAN and enables IPv4 QoS control. |
ip qos-flow-list |
Sets the QoS flow list used for IPv4 QoS flow detection. |
ip qos-flow-list resequence |
Resets the sequence number for the order in which the conditions in the IPv4 QoS flow list are applied. |
ipv6 qos-flow-group |
Applies an IPv6 QoS flow list to an Ethernet interface or VLAN and enables IPv6 QoS control. |
ipv6 qos-flow-list |
Sets the QoS flow list used for IPv6 QoS flow detection. |
ipv6 qos-flow-list resequence |
Resets the sequence number for the order in which the conditions in the IPv6 QoS flow list are applied. |
mac qos-flow-group |
Applies a MAC QoS flow list to an Ethernet interface or VLAN and enables MAC QoS control. |
mac qos-flow-list |
Sets the QoS flow list used for MAC QoS flow detection. |
mac qos-flow-list resequence |
Resets the sequence number for the order in which the conditions in the MAC QoS flow list are applied. |
qos |
Sets the flow detection condition and operation to be performed in the QoS flow list. |
qos-queue-group |
Applies QoS queue list information to an Ethernet interface and enables the legacy shaper. |
qos-queue-list |
Sets the scheduling mode in QoS queue list information. |
remark |
Specifies supplementary information for QoS. |
traffic-shape rate |
Sets port bandwidth control for an Ethernet interface. |
flow detection mode # |
Sets the flow-detection mode for filtering and QoS control. |
- #
-
See "Configuration Command Reference" and "27 Flow Detection Mode/Flow Operation".
The following tables list the operation commands common to QoS control.
Command name |
Description |
---|---|
show qos-flow |
Displays QoS flow list (mac qos-flow-list,ip qos-flow-list,ipv6 qos-flow-list) stats set by mac qos-flow-group,ip qos-flow-group,ipv6 qos-flow-group flow group command. |
clear qos-flow |
QoS flow list (mac qos-flow-list,ip qos-flow-list,ipv6 qos-flow-list) stats set by mac qos-flow-group,ip qos-flow-group,ipv6 qos-flow-group flow group command are cleared. |
show qos queueing |
Shows statistics on send queues for the Ethernet interface. |
clear qos queueing |
Clears statistics on send queues for the Ethernet interface. |