Configuration Guide Vol. 1


A.9 Ethernet

Table A-10: Compliance standards for Ethernet interfaces

Type

Standards

Name

10BASE-T,

100BASE-TX,

1000BASE-T,

1000BASE-X,

10GBASE-R

IEEE Std 802.3x-1997

IEEE Standards for Local and Metropolitan Area Networks: Specification for 802.3 Full Duplex Operation

IEEE Std 802.2-1998

IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 2: Logical Link Control

IEEE Std 802.3-2018

Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer Specifications

1000BASE-X

IEEE Std 802.3ah-2004

Amendment: Media Access Control Parameters, Physical Layers, and Management Parameters for Subscriber Access Networks

IEEE Std 802.3z-1998

Media Access Control Parameters, Physical Layers, Repeater and Management Parameters for 1,000 Mb/s Operation, Supplement to Information Technology

10GBASE-R

IEEE Std 802.3ae-2002

Media Access Control(MAC) Parameters, Physical Layer, and Management Parameters for 10 Gb/s Operation

IEEE Std 802.3aq-2006

Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications

Table A-11 PoE Compliance Standard

Standards

Name

IEEE802.3af

(IEEE Std 802.3af-2003)

Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications

Amendment: Data Terminal Equipment (DTE)

Power via Media Dependent Interface (MDI)

IEEE802.3at

(IEEE Std 802.3at-2009)

Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications

Amendment: Data Terminal Equipment (DTE)

Power Via the Media Dependent Interface (MDI) Enhancements