28.8.1 Command list

The following table lists the commands used to configure Multiple Spanning Tree.

Table 28-14: List of configuration commands
Command name	Description
instance	Sets VLANs belonging to Multiple Spanning Tree MST instances.
name	Sets a string to identify a Multiple Spanning Tree region.
revision	Sets a revision number to identify a Multiple Spanning Tree region.
spanning-tree cost	Sets the default path cost value for each port.
spanning-tree mode	Sets the operating mode for Spanning Tree functionality.
spanning-tree mst configuration	Sets the information required to form MST regions in Multiple Spanning Tree.
spanning-tree mst cost	Sets the path cost for each MST instance for Multiple Spanning Tree.
spanning-tree mst forward-time	Sets the time required for port status transitions.
spanning-tree mst hello-time	Sets the sending interval for BPDUs.
spanning-tree mst max-age	Sets the maximum enabled time for sent BPDUs.
spanning-tree mst max-hops	Sets the maximum number of hops within an MST region.
spanning-tree mst port-priority	Sets the port priority for each MST instance in Multiple Spanning Tree.
spanning-tree mst root priority	Sets the bridge priority for each MST instance.
spanning-tree mst transmission-limit	Sets the maximum number of BPDUs that can be sent per hello-time interval.
spanning-tree port-priority	Sets the default value for the port priority for each port.