27.10.2 VLAN debounce function settings

The following describes how to set the VLAN Debounce functionality.

Points to note

Set the VLAN Debounce functionality determination time to values appropriate to the configuration and operation of the network.

Command examples

1. (config)# interface vlan 100

   Switches to the VLAN interface mode for VLAN 100.

2. (config-if)# down-debounce 2

   (config-if)# exit

   Sets the down-determination time for VLAN 100 to 2 seconds.

3. (config)# interface range vlan 201-300

   Switches to the multiple VLAN interface mode for VLANs 201 to 300.

4. (config-if-range)# down-debounce 3

   (config-if-range)# exit

   Sets the down-determination time for VLANs 201-300 to 3 seconds.