26.6.1 Command list
The following tables list the commands used to configure protocol VLAN.
|
Command name |
Description |
|---|---|
|
protocol |
Sets the protocol for identifying VLANs in protocol VLANs. |
|
switchport mode |
Sets the port type (protocol or trunk). |
|
switchport protocol |
Sets the VLAN for protocol ports. |
|
switchport trunk |
Sets the VLAN for a trunk port. |
|
vlan |
Specifies the protocol-based parameter to create a protocol VLAN. |
|
vlan-protocol |
Sets the protocol name and protocol value for a protocol VLAN. |