20.2.8 Configuring RMON Ethernet History Group Control

Points to note

Configure the control information for the RMON (RFC 1757) Ethernet statistics history. The command can configure up to 32 entries. You must register an SNMP manager beforehand.

Command examples

1. (config)# interface gigabitethernet 1/0/5

   Switches to the interface mode for Gigabit Ethernet interface 1/0/5.

2. (config-if)# rmon collection history controlEntry 33 owner "NET-MANAGER" buckets 10

   Sets the information identification number of the control information for statistics history information, the identification information of the person responsible for configuration, and the number of history entries for storing statistics.

   • Information identification number: 33

   • Number of entries obtained for history information: 10

   • Identification information about the person responsible for configuration: "NET-MANAGER"