20.2.2 Configuring MIB Accessibility by SNMPv1,SNMPv2C
- Points to note
-
Configure access to the MIB of the Switch from the SNMP manager.
Command examples
-
(config)# access-list 1 permit 10.1.1.1 0.0.0.0
Configures the access list to allow access from IP address 10.1.1.1.
-
(config)# snmp-server community "NETWORK" ro 1
Configures the MIB access mode for the community of an SNMP manager and the applicable access list.
-
Community name: NETWORK
-
Access list :1
-
Access mode: read only
-