18.2.1 Command list
The following table lists the commands used to configure the power saving functionality.
|
Command name |
Description |
|---|---|
|
eee enable |
Enables the port's EEE function. |
|
shutdown # |
Turns off the power supplied to a port. |
- #
-
See "Configuration Command Reference" and "15 Ethernet".
The following table lists the operation commands related to the power saving functionality.
|
Command name |
Description |
|---|---|
|
show power |
Displays the maximum power consumption information of the device. |
|
show port eee # |
Displays EEE of the port. |
- #
-
See "21 Ethernet" in the "Operation Command Reference".