16.2.1 Command list
The following table lists the configuration commands for zero-touch provisioning.
Command name |
Description |
---|---|
system zero-touch-provisioning |
Enables zero touch provisioning. |
system zero-touch-provisioning vlan |
Sets VLAN used for zero touch provisioning. |
The following table describes the operation commands related to zero touch provisioning.
Command name |
Description |
---|---|
show system # |
Displays operating status. You can check the startup status of the zero-touch provisioning operation mode in Zero-touch-provisioning status of this command. |
- #
-
For details, see "10 Managing the Switch" in the Operation Command Reference.