15.2.1 Command list

The following tables list the commands used to configure MC operation mode.

Table 15-3: List of configuration commands
Command name	Description
save (write)^#	Saves the edited configuration to the startup configuration file. If MC operation mode is enabled, the operation command update mc-configuration process is also executed automatically.

#: See Configuration Command Reference, Chapter 3, "Editing and Working with Configurations."

The following tables list the operation commands in MC operation mode.

Table 15-4: List of operation commands
Command name	Description
set mc-configuration	Sets MC operation.
update mc-configuration	Prints information about the running software/device to MC.
copy^#1	Copies the specified file or directory. If MC operation mode is enabled, the operation command update mc-configuration is also executed automatically when the copy destination is a startup configuration file.
show system^#2	Displays operating status. The operating status of MC operation mode can be checked with "MC Configuration mode" of this command.
ppupdate^#3	Updates to the specified software. If MC operation mode is enabled, the operation command update mc-configuration process is also executed automatically.

#1: For details, see "4. Configuration and File Operations" in the Operation Command Reference.
#2: For details, see "10 Managing the Switch" in the Operation Command Reference.
#3: For details, see "15. Software Management" in the Operation Command Reference.