3.8.1 Layer 2 authentication common
The following table describes the capacity limits for common Layer 2 authentication.
Item |
Maximum number |
---|---|
Number of access lists dedicated to authentication |
1 #1 |
Number of filter conditions that can be specified for an authentication-only access list |
80 #2 |
- #1
-
You can configure one authentication-only IPv4 access list and one authentication-only MAC access list.
- #2
-
This is the sum of the filter conditions specified in the configuration command authentication ip access-group and permit and deny lines included in the filter conditions specified in the configuration command authentication mac access-group. Implicit discarding is not included.