26.8.1 Command list
The following table lists the commands used to configure Multiple Spanning Tree.
Command name |
Description |
---|---|
instance |
Sets VLANs belonging to Multiple Spanning Tree MST instances. |
name |
Sets a string to identify a Multiple Spanning Tree region. |
revision |
Sets a revision number to identify a Multiple Spanning Tree region. |
spanning-tree cost |
Sets the default path cost value for each port. |
spanning-tree mode |
Sets the operating mode for Spanning Tree functionality. |
spanning-tree mst configuration |
Sets the information required to form MST regions in Multiple Spanning Tree. |
spanning-tree mst cost |
Sets the path cost for each MST instance for Multiple Spanning Tree. |
spanning-tree mst forward-time |
Sets the time required for port status transitions. |
spanning-tree mst hello-time |
Sets the sending interval for BPDUs. |
spanning-tree mst max-age |
Sets the maximum enabled time for sent BPDUs. |
spanning-tree mst max-hops |
Sets the maximum number of hops within an MST region. |
spanning-tree mst port-priority |
Sets the port priority for each MST instance in Multiple Spanning Tree. |
spanning-tree mst root priority |
Sets the bridge priority for each MST instance. |
spanning-tree mst transmission-limit |
Sets the maximum number of BPDUs that can be sent per hello-time interval. |
spanning-tree port-priority |
Sets the default value for the port priority for each port. |