26.4.1 Command list
The following tables list the commands used to configure PVST+.
Command name |
Description |
---|---|
spanning-tree cost |
Sets the default path cost value for each port. |
spanning-tree pathcost method |
Sets the default value for the margin of values used for path costs for a port. |
spanning-tree port-priority |
Sets the default value for the port priority for each port. |
spanning-tree vlan |
Sets PVST+ starting and stopping operation. |
spanning-tree vlan cost |
Sets the path cost value for a VLAN. |
spanning-tree vlan forward-time |
Sets the time required for port status transitions. |
spanning-tree vlan hello-time |
Sets the sending interval for BPDUs. |
spanning-tree vlan max-age |
Sets the maximum enabled time for sent BPDUs. |
spanning-tree vlan pathcost method |
Sets the margin of values used for path costs for a VLAN. |
spanning-tree vlan port-priority |
Sets the port priority for a VLAN. |
spanning-tree vlan priority |
Sets the bridge priority. |
spanning-tree vlan transmission-limit |
Sets the maximum number of BPDUs that can be sent per hello-time interval. |