20.4.5 Configuring Auto MDI/MDIX Features
The Switch supports the auto MDI/MDIX feature on ports that use twisted pair cables. This functionality can be disabled on the switch. If it is disabled, MDI-X (for hub use) is always selected.
- Points to note
-
When the auto MDI/MDIX function is fixed to MDI-X, set the interfaces to be fixed.
Command examples
-
(config)# interface gigabitethernet 1/0/24
Switches to the configuration mode of Ethernet interface 1/0/24.
-
(config-if)# no mdix auto
(config-if)# exit
Disables the auto MDI/MDIX feature and fixes it to MDI-X.