13.2.1 Command list
The following tables list the commands used to configure MC operation mode.
Command name |
Description |
---|---|
save (write) # |
Saves the edited configuration to the startup configuration file. If MC operation mode is enabled, the operation command update mc-configuration process is also executed automatically. |
- #
-
See Configuration Command Reference, Chapter 3, "Editing and Working with Configurations."
The following tables list the operation commands in MC operation mode.
Command name |
Description |
---|---|
set mc-configuration |
Sets MC operation. |
update mc-configuration |
Prints information about the running software/device to MC. |
copy #1 |
Copies the specified file or directory. If MC operation mode is enabled, the operation command update mc-configuration is also executed automatically when the copy destination is a startup configuration file. |
show system #2 |
Displays operating status. The operating status of MC operation mode can be checked with "MC Configuration mode" of this command. |
ppupdate #3 |
Updates to the specified software. If MC operation mode is enabled, the operation command update mc-configuration process is also executed automatically. |
- #1
-
For details, see "4. Configuration and File Operations" in the Operation Command Reference.
- #2
-
For details, see "9 Managing the Switch" in the Operation Command Reference.
- #3
-
For details, see "Operation Command Reference" and "14 Software Management".